A60 Damper 230x230x210

SPEC DATA

A60Air Dampers Standard Features


  • Fabricated from 316 Stainless Steel
  • 24 volt DC actuated. Class approved fail safe device
  • 316 Stainless Steel fasteners
  • Bolt hole pattern to match other Marine Air Flow products
  • Installation kit complete with everything to fit up to your vessel
  • Supplied with a 3 year full replacement warranty
  • Easy installation and reset after testingCan be supplied singley or in conjunction with air intake grilles or our AC or DC Fans
  • Wheelmark class approved.

Why A60 Air Dampers?


  • These S/S Marine Fire Damper is suitable for both vertical and horizontal applications, with airflow in either direction.
  • The dampers are tested to IMO fire test procedures Code, Annex 1 Pt 3, are normally open, and fail-safe to the closed position.
  • These Dampers are supplied with the blades in the fully interlocked closed position to avoid damage during transit and installation. It is recommended that the dampers remain closed until actual date of commissioning.
  • All fire dampers are life safety products and must be treated with care during handling, storage and installation.


Survey And Standards

  • Lloyds Register Approved.
  • DNV-GL Approved.
  • ABS Approved
  • USCG Approved.
  • Transport Canada approved.
  • MED Marine Equipment Directive Compliant.
  • Fire tested to the latest IMO FTP code & in compliance international convention for the safety of life at sea (SOLAS)
  • Sira certification (Ex) category 2 equipment
  • Corrosion Tested - EN60068-2-52 severity 2 conditions
  • Vibration Tested – EN60068-2-6 (5Hz to 350Hz @2g)
An A60 manufactured stainless steel damper for your marine engine room when you have to meet a specific class or surve

Damper Measurements

Part Code:

SSD-230/230/210

Height "H"

230 mm

Width "W"

230 mm

Depth "D"

210 mm

KG

2.5

Cost:

$2,255.00

Prices are in USD and will attract 10% gst for domestic purchasers.

Multiple Damper Assemblies with A60 Dampers

Multiple damper assemblies are approved to the following sizes:


  • Horizontal layout (side by side) - 2080 x 1000mm
  • Vertical layout (stacked one on top of the other) - 1000 x 2800mm
Horizontal example of joining A60 dampers
Vertical example of joining A60 dampers
A60 Damper control mode standard parameters
Control mode test switch on A60 damper
Earthing boss for Atex rating on an A60 damper

Actuator Setup

A60 Dampers actuator diagram for three position universal
A60 Dampers actuator diagram, 3 position compact

Need Help With A Damper?



Please get in touch and we will be more than happy to help with any questions you have about our Stainless Steel Dampers