Stainless Steel Air Dampers
Fire Flaps to Protect Your Engine Room
Air Dampers are a necessary requirement for the engine room of any commercial in-survey vessel, and are also a good idea on non survey craft.
Typically Air Dampers are either triggered automatically or manually, and effectively close the air supply to the engine room to allow fire suppression equipment to work. We can manufacture and supply Air Dampers (Fire Flaps) either in conjunction with our Air Intake Grilles, our High Volume Fans or supplied as a stand alone product.
They can be mounted immediately rear of the grilles, within the duct work itself, on the bulkhead or deck head penetration, or any penetration that serves air into or out of the engine room.
Our Air Dampers can also be supplied with a control cable that runs from the damper to an external location outside of the engine room space. This manual control is easily operated by disengaging the pull ring from the keeper bracket. This action trips the spring-loaded damper louvre which closes off the air supply to your engine room. This is also a semi auto control. If there is fire or intense heat in the vicinity of the control cable (which is a synthetic material), the cable will melt and trigger the flap automatically. This manual activation kit is available for $250 + gst.
For a fully automatic system, we can supply the dampers with a 24V DC actuator. This actuator works via a temperature probe mounted in the air stream, and once the probe reaches 72°C it will shut the damper automatically. The actuator will also trip if the power supply to the system is turned off. These automatic controllers are a great option for a set and forget situation ensuring full peace of mind. These auto activation kits are available for $825 + gst
If you use an Air Damper system, you will need to test and prove the system annually for a surveyor. To reset after this test simply re-pull the cable and re-engage the ring into the keeper bracket. It's very easy.
If your vessel is in survey and you need to meet a certification level, we can also supply A-60 class certified air dampers
About Our Stainless Steel Dampers
- 11 Stock sizes ready to be picked off the shelf
- Manufactured to size and shape.
- Could be easily installed by an owner operator.
- Manual or Automatic release.
- Easy to reset after testing.
- Can be supplied singly or in conjunction with air intake grilles or our AC or DC Fans.
- Meets NSCV & USL code.
Finished Product Details - SS Air Dampers
Footprint:
Matches High Vol Ac/Dc Fan housing footprint
Materials:
Stainless Steel 316 marine grade, fully welded
Supplied Finish:
Stainless steel is electropolished to better increase its protection from corrosion.
Action:
Spring loaded louvre / Automatic 24v DC Actuator
Stock Sizes:
We have the following stock sizes. (length x width x depth)
- 200x200x100
- 200x730x100
- 200x970x100
- 280x280x100
- 280x590x100
- 390x390x100
- 390x730x100
- 390x1070x100
- 490x490x100
- 590x590x100
- 850x850x100
SS DAMPERS DOCUMENTS & DOWNLOADS
Installation Instructions
Spec Data Sheets
Why MAFI Air Dampers?
- Our dampers are able to be set with a manual activation system (chord that will break at a set temperature) or by manually pulling a release pin
- They can also be triggered using a 24v DC Actuator that works via a temperature probe
- Our stainless steel dampers meet NSCV & USL code
- The footprint of our dampers correlates directly to the footprint of our high volume fans.
We stand by our products and offer a 110% money back guarantee!
Pricing for Stainless Steel Air Dampers
Our dampers are available in 11 standard sizes.
Manual activation kits are available for $265 + gst.
Auto activation kits are available for $825 + gst or can be supplied pre-fitted to your damper for $930
Contact us
Yes we can manufacture stainless steel air dampers to size, however it would be best if you contacted us first so we can talk about your requirements.